Dura-Flo and Xtreme pumps for liquid coatings are designed to handle a high range of pressure without compromising flow.

Electric pumps for liquid coatings have dual lowers and outputs up to 4000 cc per cycle.

Dual control electric supply pump performs well under high pressure (up to 3000 psi or 206 bar). Adding advanced control optimizes fluid pressure and flow rates, especially with Intelligent Paint Kitchen technology.

Ideal for small to medium circulation systems with up to 2000 cc per cycle outputs, this dual control electric pump minimizes pulsation with its unique four-ball lower. Advanced control adds easy integration with Intelligent Paint Kitchen technology.

Choose between Graco’s Endura-Flo Extended Pressure 4:1 models or Extended Durability 3:1.

Graco’s Glutton bellows seal design pump handles a broad range of coatings. The external check allows for quick maintenance for materials that pack or mat out easily.

High-Flo 4-Ball pneumatic pumps are designed to handle tough finishing applications, run longer and give you outstanding performance.

Graco’s line of Husky double diaphragm pumps are manufactured with your productivity in mind – providing you with one of the most reliable and efficient pumps in the market. Available in pneumatic and electric options, each diaphragm pump is tested before leaving our factories.

Monark 2-Ball Supply Pumps offer compatibility with a number of materials. With a slightly smaller air motor to its President counterpart, the pneumatic two-ball piston pump is great for consistency and low pressure.

Graco’s President 2-Ball Supply Pump for liquid coatings is a pneumatic positive displacement pump with a two-ball design for uniform and easily controlled delivery.

Graco’s President Sealed 4-Ball Circulation Pumps offer improved durability, more compatibility, and longer life span.

Graco’s Viscount 2-Ball Pumps utilize hydraulic powered piston pumps for high efficiency. The unique design allows it to operate inside the factory and outdoors.

Graco’s M2K entry-level mechanical plural component mixing system increases mix material accuracy and reduces material waste, compared to hand mixing.

Graco’s ProMix 2KE makes plural component mixing easy. The compact, entry-level proportioner is available in pump and metered versions for all spray technologies.

ProMix 2KS plural component mixing system offers precise and reliable electronic proportioning from entry-level to upgraded applications. Compatible with solventborne, waterborne and acid catalyzed materials, the two-component proportioner provides the flexibility and efficiency you need on your production line.

Graco’s ProMix 3KS plural component mixing system offers mixing precision for three-component materials. Purchase with a ProMix 2KS or upgrade an existing 2KS.

The ProMix Positive Displacement (PD) Proportioner Platform is redefining fluid control, plural component mixing and manufacturing processes. Stay on ratio within 1 percent mixing accuracy. Stay on budget with less rework and simple maintenance.

An air spray gun uses a low-pressure fluid stream with compressed air at the air cap to atomize material in a controlled manner. Used to spray low to medium viscosity fluids, this air paint gun method produces a high quality, Class A or decorative finish.

Airless spraying directs fluid under high pressure – without compressed air. Often used for protective coatings, airless spray guns quickly and efficiently apply high viscosity material.

An air-assisted airless spray gun can produce fine atomization when spraying medium to high viscosity fluids. This combination of airless and air spray technology works well for wood furniture topcoats or fabricated metal parts.

Achieve high transfer efficiency and an even coating with an electrostatic spray gun. More paint evenly coating parts means less goes to waste. This leads to significant cost savings. Electrostatic paint guns also increase finish quality and production throughput, while decreasing VOCs (volatile organic compounds) and HAPs (hazardous air pollutants).

Graco’s ProBell Rotary Applicator not only delivers superior quality, high transfer efficiency and precision spraying, it’s also lightweight and compact for lower payload robots or reciprocators.

Global Finishing Solutions’ most popular industrial booth line, GFS Open Face Paint Booths are flexible, cost-effective solutions for a wide variety of finishing applications. Choose from 260 pre-engineered models, or we can custom design an Open Face Booth to meet your specific requirements.

Global Finishing Solutions’ smallest paint booth, Bench Booths allow businesses and hobbyists to paint small products in a safe, code-compliant environment. Models are available with an integrated raised bench or designed to be placed on a countertop to make painting small parts easy and accessible.

With high-efficiency filtered intake doors, GFS Enclosed Finishing Booths provide a safe, cost-effective finishing environment for producing quality paint finishes. Select from 260 pre-engineered models and standard options, or it can be customized to meet your needs.

Global Finishing Solutions’ General Purpose Paint Booths are high-quality, cost-effective solutions for industrial manufacturers and businesses that need to paint equipment, utility vehicles and trucks that are too large for traditional automotive refinish spray booths but too small for our Large Equipment Paint Booth line.

GFS’ Large Equipment Paint Booths are designed for long-lasting performance and constructed of high-quality materials for unrivalled structural integrity. As the industry’s most comprehensive paint booth line, you can count on GFS Large Equipment Booths to deliver a superior quality finish in the most efficient manner.